04-24-2012 05:57 AM - edited 03-15-2019 05:20 AM
Hi all,
We have a project of connecting 2 Siemens Hi-Path PBX and we would like to use Cube to create a Sip trunk between our two location.
I found a document on cisco website with a design (please see attachment), and I'm wondering if the use of 1 Voice Gateway AND 1 Cube for each site was mandatory.
I mean, can Cube play the role of Voice Gateway AND Cube ? This is to limit cost of hardware.
So we would purchase two 2900series instead of four.
Thanks for your answer.
Regards
Fabian
04-24-2012 07:12 AM
Hi giordano,
you don't need the two CUBE for connect the PBX, you only need the two Voice Gateway.
the first VG will have a dial-peer pots toward the PBX and a dial-peer voip (H323 or SIP is up to you) toward the second VG, the same configuration is needed on the second VG.
04-25-2012 12:17 AM
Ok thank you.
Fabian
Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community: