I have a 2651XM with AIM-CUE. The system is also running CME 3.1 (software version on router is 12.3.7T)..Couple of issues..
1. I want to setup the CUE to import users already configured in the CME. When I run the Initialization wizard on the CUE administration page, it asks me to enter the CallManager IP address, as well as JTAPI username and password. I expected it to ask for CallManager Express router IP address, admin username and password. Please see attached snapshot.
Any ideas ??
Are there two different CUE images one which integrates with CallManager and one which integrates with CallManagerExpress?
2. Also when the CUE initializes it has the following boot sequence (partial boot sequence).
INIT: Entering runlevel: 2
********** rc.post_install ****************
INIT: Switching to runlevel: 4
INIT: Sending processes the TERM signal
and after this it keeps displaying "waiting X" where X will increment from 1 and goes upto 400 (This is typically 400/60 = 6 minutes approximately). Only after waiting for atleast 6 minutes can I access the CLI or the GUI of the CUE module. Any idea why this happens ?
Sankar, issue #2 This is the default behaviour of AIM module.
The processes are being intialized while the scripts are running. They do take a few minutes. I have not timed the AIM, but, the NM-CUE does take 3-4 minutes after you get the CLI prompt for the system to reach the ONLINE state.
As mentioned previously in my previous article and following the same idea of certificate pinning in Cisco Meeting Server, to demonstrate this concept added since version 3.0. I used two different CA to sign :1-The WebBridge certificate with CA's certific...
Certificate pinning is introduced on cisco meeting server starting in CMS 3.0 to help prevent man in the middle attack.But what is the Certificate Pinning?Traditionally, SSL Handshake consists on the validation of the server's certificate, let's say colla...
In a Clustering over the WAN deployment, securing the ICCS (Intra-Cluster Communication Signaling) traversing the WAN can be a requirement. The IPSEC VPN Policy between nodes can be configured to secure the ICCS Traffic.To quickly verify that the IPSEC is...
Attracted by the concept of dial plan and the passion of writing, I launched a challenge to write a workbook with practical scenarios covering in details this concept, the result is a workbook with 30 practice labs treating many components such route patt...