03-14-2011 03:02 AM - edited 03-13-2019 07:21 PM
Hello all,
Recently we have added a new dmp 4310g to our existing DMS.
The rest of the dmps are 4400.
We go through the manual installation for each dmp and they can communicate with DMM without any restrictions.
But, with the 4310G we had the following issue. Even though it could register to the DMM and appear as UP, after a while (30s) it turned down.
The 4310G was operational and reachable through the network but an unknown reason the DMM would declared it as down.
Also, the internal memory couldnt be mounted!!
I'm attaching a screen shot of this.
Has anyone else experienced this before?
Thank you
03-14-2011 07:30 AM
The symptom that you are reporting is a common symptom that can be seen
when the DMP management password is DIFFERENT from the password
configured for the SERVER Settings in the Digital Signs(DS) module of the
the Digital Media Manager(DMM). Once the passwords match, the status
should remain online.
After this is resolved, the storage numbers * SHOULD * appear as expected.
Note: The Storage values will appear AFTER the first status update which is
around 5 minutes.
I Hope this Helps!
T.
03-14-2011 07:53 AM
Hi Tomas,
Thanks for answering.
I can assure you that the password was correct( i was using the same password as for the 4400 models,which is UP!)
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide