04-01-201405:17 AM - last edited on 03-25-201907:03 PM by ciscomoderator
Trying to setup the color keys on the DMP 4310 remote to switch between CAST and playlist. Have it working fine on DMP 4400G and used the instructions from DMP4310-map-remote-buttons.docx (https://supportforums.cisco.com/document/81906/dmp4310-map-remote-buttonsdocx), but the keys do not seem to invoke anything. Have tried firmware 188.8.131.52 and 5.4. Confirmed each step of the DMP4310-map-remote-buttons.docx and .dmp files are on the DMP and get_param?p=irasrv.key* shows the commands are assigned to color keys. Confirmed stings when applied through browser to DMP change between CAST and playlist.
There is just no indication that the DMP has received anything when the color key is pressed, unlike the DMP 4400 were it tells you a key is not bound. Pressing help does bring up the show IP so the remote is working.
irasrv.key_GREEN T_STRING ira add 1 shell 1 GREEN mng write sh bg /tmp/ftproot/usb_1/signage.dmp irasrv.key_RED T_STRING ira add 1 shell 1 RED mng write sh bg /tmp/ftproot/usb_1/cast.dmp