cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
Announcements
Walkthrough Wednesdays
927
Views
0
Helpful
2
Replies
Highlighted
Enthusiast

DMP 5.2 upgrade question

Hi all,

I have got the following question for you.

We have a live DMS setup which is up and running for the last year.It is 5.1 and we just received the upgrade cds to 5.2

I have upgraded all the live DMPs to 5.2 but in the next month we will implement some new ones. The new ones were shipped with 5.0 version,I know that i will have to upgrade them to 5.1 and then to 5.2.

Will we be able to upgrade(through the DMM) the newly added DMPs after we have upgraded both the DMM and VP to 5.2 OR do we need to upgrade each one individually by connecting directly to them?

Anyone out there facing the same issue?!!

Thank you guys.

2 REPLIES 2
Highlighted
Cisco Employee

The new DMPs (4400G) **should be** shipping with DMS 5.2.   I would contact the supplier

or Cisco SE to see why they came with 5.0.   The BEST way to upgrade the DMPs is

by the DMP-DM. 

On another note, If the DMPs are indeed 5.0, you will need to upgrade the Kernel FIRST and then

Firmware next.  Please verify the DMP Model numbers and versions prior to attempting

any upgrades.

http://www.cisco.com/en/US/docs/video/digital_media_systems/5_x/5_2/dms/release/notes/dms52rn.html#wp115036

http://www.cisco.com/en/US/docs/video/digital_media_systems/5_x/5_2/dms/upgrade/guide/dms52upg.pdf

http://www.cisco.com/en/US/prod/collateral/video/ps9339/ps7220/data_sheet_c78-480272.html

Highlighted

Well, since i'm referring to an old order,all the DMP were originally shipped with 5.0 and some of them are still boxed.

Since we have upgraded the DMM to 5.2 all we did was to individually upgrade each DMP that is going to be implemented in the DMS from now on.

We ve tested it and it works fine.

Content for Community-Ad