cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
1183
Views
0
Helpful
1
Replies
Highlighted
Enthusiast

DMS 5.2 and Live Feed Playback on DMP

Hi all,

Is there any way to play a live stream (e.g from a DME ) directly to DMP through Digital Signs?

Thank you.

1 ACCEPTED SOLUTION

Accepted Solutions
Highlighted
Cisco Employee

The DME supports the following live-streaming formats:

- Microsoft Windows Media

- MPEG-4/H.264

The Cisco Digital Media Player 4400G integrates with the Cisco Digital Media Manager to deliver:

Standards-based video codec support with MPEG1, MPEG2, and MPEG-4 Part 10, and MP3 audio, all deliverd within MPEG-2 TS over User Datagram Protocol (UDP) or RTP over RTSP (RTP over TCP) in both standard- and high-definition (SD and HD, respectively) formats

The key here is MPEG-2 TS.  The DME encoders do not do this.

Options:

- Purchase an Encoder (ie. Scientific Atlanta) that supports MPEG-2 TS.

- Use a Transcoder to INGEST the Windows Media Stream(s) from the DME and

  Transcode the WMV Live stream to MPEG-2 TS Stream.

If this answers your question, Please take time to mark this

discussion answered & rate the response.


Thank You!


T.

View solution in original post

1 REPLY 1
Highlighted
Cisco Employee

The DME supports the following live-streaming formats:

- Microsoft Windows Media

- MPEG-4/H.264

The Cisco Digital Media Player 4400G integrates with the Cisco Digital Media Manager to deliver:

Standards-based video codec support with MPEG1, MPEG2, and MPEG-4 Part 10, and MP3 audio, all deliverd within MPEG-2 TS over User Datagram Protocol (UDP) or RTP over RTSP (RTP over TCP) in both standard- and high-definition (SD and HD, respectively) formats

The key here is MPEG-2 TS.  The DME encoders do not do this.

Options:

- Purchase an Encoder (ie. Scientific Atlanta) that supports MPEG-2 TS.

- Use a Transcoder to INGEST the Windows Media Stream(s) from the DME and

  Transcode the WMV Live stream to MPEG-2 TS Stream.

If this answers your question, Please take time to mark this

discussion answered & rate the response.


Thank You!


T.

View solution in original post

Content for Community-Ad