08-06-2010 04:33 PM - edited 03-13-2019 07:05 PM
It is possible to downgrade a DMP version 5.2 to version 5.1. I have a DMM in the version 5.1 but I bought more DMPs but come with version 5.2 and DMM does not recognize them.
What's the best practice in this situation?
Thanks
Solved! Go to Solution.
08-09-2010 12:35 PM
Aureli,
Glad I could assist. Can you please mark this thread as "Answered".
Regards,
Sagar D
08-07-2010 08:07 AM
Aurelio,
DMPs can be reimaged (upgrade/downgrade) to any firmware version from any firmware version. So you can downgrade your DMP from 5.2 to 5.1.
Log in the 5.2 DMP using https://
I would also encourage you to checkout the new release of DMS solution - 5.2 - which has considerable bug fixes and new features as compared to 5.1
The latest release is 5.2.1 . Release notes can be located at http://www.cisco.com/en/US/docs/video/digital_media_systems/5_x/5_2/dms/release/notes/dms52rn.html#wp180130
Hope this helps.
Regards,
Sagar Dhanrale
08-09-2010 12:02 PM
Hi Sagar
Thanks for your help.
It's working my DMP in 5.1 version.
Regards
Aurelio Zavaleta
08-09-2010 12:35 PM
Aureli,
Glad I could assist. Can you please mark this thread as "Answered".
Regards,
Sagar D
10-20-2010 06:10 AM
hi aurelio,
I have a issue because I did a upgrade from 5.1 to 5.2, but now I want to go back to 5.1 again and I can´t find the 5.1 image, coul you send it to me??
thanks ytamayo@gmail.com
10-20-2010 07:38 AM
I just wanted to elaborate on Sagar's comments. He is correct in saying that
we can re-image the DMPs to an earlier version. But Downgrading the DMPs
is NOT Supported.
Also, you ** COULD ** possibly render your DMP unusable in certain conditions.
So BEWARE! There is a big gotcha when trying to downgrade from
5.2 to 5.1.
DMS 5.2 introduced NTP to the DMPs. If your DMPs are configured for NTP while
using 5.2 and you perform a downgrade to 5.1, Your DMP will become unusable.
NOTE: BEFORE YOU PERFORM ANY DOWNGRADE FROM 5.2 TO 5.1, RESTORE
THE DMP TO FACTORY DEFAULTS FIRST. AFTER THE DMP IS BACK TO FACTORY
DEFAULTS (LIKE JUST COMING OUT OF BOX), YOU CAN PROCEED WITH DOWNGRADE.
10-20-2010 10:42 AM
hi Tomas
I got a issue trying to register a DMP 4400 to a DMM 5.1, the DMM see the DMPbut just for a while, and after a few seconds the dmp dissapear, and it show the red sign. The DMM never show how many storage the dmp has. I had this issue before, and I know the DMM has to see the internal storage to the DMP works.
any helps.
10-20-2010 02:00 PM
Yusset,
This thread has already been answered to avoid
confusion please start a new thread since this is
a different subject.
When opening the new thread, please include a text file
from the status mib of the following:
- status mib results from a working DMP-4400
- status mib results from the problem DMP-4400
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide