cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
Announcements
177
Views
0
Helpful
3
Replies
Highlighted
Beginner

E1 R2 - 4331.

Hi, 

 

I am deploying a Cisco 4331 Gateway connected to an Avaya Gateway. What I want to do is the following. 

 

PSTN ---> E1 R2 ---> Cisco 4331 ---> E1 R2 ---> Avaya Gateway. 

 

Do you know if having E1 R2 signaling at both sides of the 4331 works? 

 

Thanks. 

3 REPLIES 3
Highlighted

Re: E1 R2 - 4331.

I can see no reason for why it would not work. Have you tried it and ran into any issues with it? If so please give us a little information about the details of the problem encountered for us to be able to help you better.

Please rate all useful posts
Highlighted
Beginner

Re: E1 R2 - 4331.

Hi Roger, 

Sorry for the late response, we are now in the implementation phase. We tested R2 Integration between Cisco and Avaya G650 and the trunk seems fine, it is UP, but when we try to send a call from Avaya to Cisco I do not receive anything on the Cisco. Which debug do you recommend to troubleshoot this issue? 

 

Thanks. 

Highlighted

Re: E1 R2 - 4331.

E1 R2 is not really my strongest area, but I would think that you'd get a far way with debug voip ccapi inout, also likely debug voip dialpeer might be usefull. Others might have more experience with R2 circuits and can give you other advice.

Please rate all useful posts