Event Log messages from the Cisco Expressway for Monitoring using Syslog

[n26neeraj]

Hi

We would like to configure Expressway to send Sysylog messages for Critical Events. The Admin guide explains how logging can be configured for the remote syslog server to capture alerts.

However, is there some document which would talk about the "different scenarios" we can try to recreate in the lab to simulate and see if the syslog messages are being sent for different Events.

I could see something for CER   https://www.cisco.com/c/en/us/td/docs/voice_ip_comm/cer/11_0/english/administration/guide/CER0_BK_C50B9FF0_00_cisco-emergency-responder-administration-guide-1101/event_log_messages.pdf

[Mike_Brezicky]

Check out the admin guide here - https://www.cisco.com/c/dam/en/us/td/docs/voice_ip_comm/expressway/admin_guide/Cisco-Expressway-Administrator-Guide-X12-5.pdf

Page 243 references the logging configuration. You can send logs to your defined syslog server and there are a few other parameters there.

[neil wooloff]

does anyone have a list of syslog messages; specifically alarms; that can be captured in syslog events?

have looked and found nothing so far