fax-to-mail (T.37) on fxs-card on cisco 1760.

[al_tatarenko]

Hi, have a nice time!

Could fax-to-mail (T.37) works on fxs on cisco 1760??? I've tried config from the cisco.com and didn't get anything that like right work, but fax-to-mail (T.37) on E1 card works fine...

[sbilgi]

Apply input gain and output attenuation to the ports and see if it helps.

[al_tatarenko]

Could You look & tell - what is wrong:

fax receive called-subscriber $d$

fax interface-type fax-mail

mta send server 10.0.0.10 port 25

mta send subject To you there has come a fax from $s$

mta send mail-from hostname domain.com

mta send mail-from username $s$

!

!

call application voice appon flash:appon.tcl

!

call application voice appoff flash:appoff.tcl

!

voice-port 2/0

cptone RU

!

!

dial-peer voice 100 pots

destination-pattern .......

port 2/0

!

!

dial-peer voice 1100 pots

application appon

incoming called-number 9[8,9].

port 2/0

!

dial-peer voice 1101 mmoip

application fax_on_vfc_onramp_app out-bound

destination-pattern 999

information-type fax

session target mailto:Fax2Mail@domain.com

!

[Markus Schneider]

I believe only interfaces that support DNIS will work. All configs I've seen include direct-inward-dial. So BRI/PRI interfaces will work, but not fxs/fxo.