10-17-2007 09:07 AM - edited 03-13-2019 04:32 PM
Hi,
can you help me to configure Redial Softkey
of 7912 Ip phone.
CCME version : 4.1
I have also put a config, but it doesn't work :
telephony-service
load 7912 CP7912080001SCCP051117A
max-ephones 10
max-dn 10
ip source-address 10.1.3.150 port 2000
timeouts interdigit 5
max-conferences 4 gain -6
transfer-system full-consult
fac custom redial **8
create cnf-files version-stamp Jan 01 2002 00:00:00
10-17-2007 09:15 AM
Hi Driss,
You probably want to change 7 and 8;
SUMMARY STEPS
1. enable
2. configure terminal
3. ephone-template template-tag
4. softkeys alerting {[Acct] [Callback] [Endcall]}
5. softkeys connected {[Acct] [Confrn] [Endcall] [Flash] [Hlog] [Hold] [Park] [Trnsfer]}
6. softkeys hold {[Newcall] [Resume]}
7. softkeys idle {[Cfwdall] [Dnd] [Gpickup] [Hlog] [Login] [Newcall] [Pickup] [Redial]}
8. softkeys seized {[Cfwdall] [Endcall] [Gpickup] [Hlog] [Pickup] [Redial]}
9. softkeys ringing {[Answer] [Dnd] [HLog]}
10. exit
11. ephone phone-tag
12. ephone-template template-tag
13. end
The third soft-key button on the Cisco Unified IP Phone 7905G and Cisco Unified IP Phone 7912G is reserved for the Message soft key. For these phones' templates, the third soft-key defaults to the Message soft key. For example, the softkeys idle Redial Dnd Pickup Login Gpickup command configuration displays, in order, the Redial, DND, Message, PickUp, Login, and GPickUp soft keys.
The NewCall soft key cannot be disabled on the Cisco Unified IP Phone 7905G or Cisco Unified IP Phone 7912G.
From this good doc;
Hope this helps!
Rob
10-18-2007 08:13 AM
hi,
thanks for your response.
My need is when i press the Redial softkey, it must works.
thank you
10-18-2007 03:18 PM
Can you upgrade phone to 8.0(2) and try again? Do not use 8.0(3) that has a bug in directories.
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide