GSM ISDN PRI gateway

[blive56133]

Hi.

I have 2n Stargate PRI gateway connected to cisco VG 3925 but I don't have CLI. Does anyone know if this is supported and if yes how do I enable it?

Or can you recommend some other GSM ISDN PRI gateway that I can use in this combination?

[Vivek Batra]

Hi,

Please confirm the call flow and in which direction you don't have CLI?

- Vivek

[blive56133]

Call flow: when I call from cisco phones to mobile phones (there is a route pattern in cucm which sends all call to mobiles through GSM gateway). 

Also, MGCP is being used here.

[Vivek Batra]

Hi,

AFAIK, mobile terminal (2n gateway here) doesn't send the CLI during call setup. CLI is only presented by mobile network to called party. Only thing which mobile terminal can do is to enable/disable CLIR which instructs telco not to present the CLI to called party.

Can you please check if there is any CLIR configuration available in 2n gateway OR verify using the same SIM card and make outgoing call, see if CLI is available to called party.

- Vivek

[blive56133]

Solved! The problem was with CLIR config on the device itself. Thanks Vivek!

[Vivek Batra]

Hi,

Thanks for updating the thread with result. Wouldn't you like to rate this thread to help others having similar query.

- Vivek