cancel
Showing results for 
Search instead for 
Did you mean: 
cancel

How connect IP Phone 7960 with AS5350 without CCM or SIP ?

kneg
Beginner
Beginner

HI ALL !!!

PLZ, help me !

I think this is Cisco IP Keyswitch.

http://www.cisco.com/univercd/cc/td/doc/product/software/ios121/121newft/121limit/121yd/121yd_5/ipkeys.htm

But the question - whether it will work, if 5350 and 7960 are in different cities, and certainly in completely different subnets, divided alied routers, and by the document from link, 7960 address receives on DHCP from 5350.

As far as I remember DHCP works only in the LAN.

Whether means in my case to connect these devices it is impossible?

So I understand?

Thanks ALL !

2 REPLIES 2

ciscomoderator
Community Manager
Community Manager

Since there has been no response to your post, it appears to be either too complex or too rare an issue for other forum members to assist you, or there is no public information available at this time. If you don't get a suitable response to your post, you may wish to review our resources online at http://www.cisco.com/go/solutions. You may also contact our product information line at 1-800-553-NETS or a Cisco Systems Engineer at your local Cisco office or reseller. To locate your local Cisco representative, visit http://www.cisco.com/warp/public/687/Directory.shtml

If anyone else in the forum has some advice, please reply to this thread.

Thank you for posting.

MANUEL HEIANNA
Beginner
Beginner

The ip keyswitch is supported only in 1750,1751,2600,3600, 3725,2745 and IAD 2420. In case that you use one of this routers, you can use the command "ip helper-addres" to resolve the issue about DHCP ( its works in lan enviroments), this command redirects all the local broadcast to a unique ip address ( your router, in another network).

Regards

MaNuk

Getting Started

Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community: