03-26-2003 07:14 AM - edited 03-12-2019 11:13 PM
Here's the scenario...
- we have an exec & their admin -- both with 7940's
- admin has her boss' ext. as a shared line appearance on her phone
- boss is away / call comes in on his line / admin picks up call from her phone
- caller wants to be transfered to boss' vmail
- she hits transfer / dials VM main # / dials <boss' 4-digit> <#2> / transfer
- boss gets back and listens to vmail
- boss responds to vmail
- boss' vmail response ends up on admin's vmail
We've also tried creating a TransferToVM profile and defining a TransferToVM CTI port. Same thing. One of the reasons for upgrading to 3.2(2c) was to hopefully resolve this issue.
03-27-2003 06:53 AM
Hi,
Using CCM 3.2 there is no way to avoid this. The reason is that by the time the admin completes the transfer, Unity has already locked into the CallInfo message sent by CallManager during the initial part of the transfer. Even though CallManager sends updated CallInfo when the transfer is completed, Unity does not use this information.
Using CCM 3.3, this can be accomplished using the new Cisco IPMA (IP Manager-Assistant) feature.
03-27-2003 07:26 AM
Thank you.
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide