Hello,
I have a two dial-peers:
dial-peer voice 101 pots
destination-pattern 80679463149
port 0/1/0
!
dial-peer voice 1011 pots
incoming called-number .
port 0/1/0
To port 0/1/0 incoming call arrives with no calling number. But as inbound dial-peer the first dial-peer is selected!
But in accordance with http://www.cisco.com/en/US/tech/tk652/tk90/technologies_tech_note09186a008010fed1.shtml#topic6
the second dial-peer must be matched!
Please, help to understand the problem. Thanks!