08-01-2016 01:23 AM - edited 03-13-2019 09:33 PM
Hi Guys
I'm trying to configure a SIP trunk between CUCM 10.5 and Skype For Business Server 2015
The SIP trunk status is down and I get an error (local=2)
Any ideas?
Thanks
Maheer
08-01-2016 04:30 AM
Hi Maheer,
Most likely it is a network connectivity issue between cucm and S4B. You may verify the config as per the following
https://technet.microsoft.com/en-us/library/dn951430.aspx
SIP trunk settings, specially the incoming port need to be verified.
Manish
08-01-2016 05:04 AM
Hi Manish
I followed this document yes
I think its on the Microsoft side but need to prove it to the MS engineer
Thanks
M
08-10-2016 11:21 AM
Let me have a look i have done the integration CUCM with SFB ..can you please take the snapshot from SFB of the configuration you have done and pull logs through OCS logger tool. this will give us pretty much clear idea whats going around on SFB.
Regards
Nadeem Ahmed
08-10-2016 11:47 AM
Hi Nadeem
The customer is in control of the sfb setup, I'll have a talk with him and get it for you ASAP
Thanks
Maheer
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide