08-18-2006 12:53 PM - edited 03-15-2019 04:26 AM
Hi, right now a customer is using 7905 ip phones with H.323, the project is build to support this protocol the customer wants to work with, the 7905 and 7905G are EoS, the replacement is 7906G, however in the data sheet there is not H.323 support. Is Cisco not going to work with H.323 protocol for IP Phones single line (low cost phones).
I will appreciatte your feedback.
Regards,
Berlitz Maldonado
08-18-2006 07:40 PM
End of support for the H.323 software image for the 7905 and ATAs was announced late last year. Going forward, SCCP and SIP are the supported protocols on these devices. See the link below.
http://www.cisco.com/en/US/products/hw/phones/ps379/prod_eol_notice0900aecd80339700.html
Hope this helps. If so, please rate the post.
Brandon
08-21-2006 05:58 AM
Meaning that Cisco is not going to support H.323 protocol in its IP Phones... Just want to be clear on this, since que have a negotiation started with a customer since last year with this phones using this protocol, and now, that Cisco is not going to support them, we have to change the negotiation.
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide