Hi all,
I have some IP Phones connected to a Cisco 2950 and there're some problems with them.
1. The ports connecting to IP Phones are configured with Auto QoS (auto qos voip cisco-phone), but when the PC connected to the PC Port of a phone got some large traffic, the quality of voice degrades considerably.
2. When the power of the 7905G phone suddenly does down, the port goes to err-disable state. This only occurs when I pull off the outlet, not apply when pulling the adapter off the phone.
Have anyone met the problems, pls let me know the solution(s).
Thanks,
Hoanghiep
