cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
101
Views
0
Helpful
1
Replies
Beginner

IP to PBX voicemail via as5300

I am having the same problem described in this link in reverse. http://www.cisco.com/warp/public/788/AVVID/pstn_no_vm_ip.html

That being an IP phone calling a pabx line via a as5300 gateway. All calls work fine but if the phone rings out and is transferred to voicemail it disconnects after about 3 seconds of the greeting message. If the destination line is busy and the forwarding is effective immediately then the voicemail does not drop out.

any ideas? if no one has a solution could they explain to me what is taking place during the forwarding to voicemail. I have tried all codecs available on the gateway for the voip leg of the call.

thanks,

Michael

1 REPLY
Highlighted
Enthusiast

Re: IP to PBX voicemail via as5300

Why don't you run a debug on the Cisco? It will definitely bring some light on the issue.

CreatePlease to create content
Ask the Expert- MPLS troubleshooting