03-28-2017 09:59 AM - edited 03-13-2019 09:50 PM
I am going over the Jabber Guest documentation and it has the required firewall rules for this to work. Are these the only rules needed or do I also need all or some of the rules listed in the Expressway Basic config guide also?
03-29-2017 01:14 AM
Hi Cameron,
You may check pages 10-12 of the following guide as well
http://www.cisco.com/c/dam/en/us/td/docs/voice_ip_comm/expressway/config_guide/X8-7/Cisco-Expressway-IP-Port-Usage-for-Firewall-Traversal-Deployment-Guide-X8-7.pdf
HTH
Manish
03-30-2017 08:15 AM
Hi Cameron,
you can check on page 24 in the following deployment guide it is very detailed based what is your deployment on NIC or Dual NIC.
http://www.cisco.com/c/dam/en/us/td/docs/voice_ip_comm/expressway/config_guide/X8-9/Cisco-Expressway-Jabber-Guest-Deployment-Guide-X8-9.pdf
Best Regards
Anestis
Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community: