cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
477
Views
0
Helpful
2
Replies

Jabber Guest Firewall Rules

I am going over the Jabber Guest documentation and it has the required firewall rules for this to work.  Are these the only rules needed or do I also need all or some of the rules listed in the Expressway Basic config guide also?

2 Replies 2

Manish Gogna
Cisco Employee
Cisco Employee

Hi Cameron,

You may check pages 10-12 of the following guide as well

http://www.cisco.com/c/dam/en/us/td/docs/voice_ip_comm/expressway/config_guide/X8-7/Cisco-Expressway-IP-Port-Usage-for-Firewall-Traversal-Deployment-Guide-X8-7.pdf

HTH

Manish

akoukis
Level 1
Level 1

Hi Cameron,

you can check on page 24 in the following deployment guide it is very detailed based what is your deployment on NIC or Dual NIC.

http://www.cisco.com/c/dam/en/us/td/docs/voice_ip_comm/expressway/config_guide/X8-9/Cisco-Expressway-Jabber-Guest-Deployment-Guide-X8-9.pdf

Best Regards

Anestis