LinkSys and CCM5

[Vladimir Lazovic]

Hello

Do i need third party license to register Linksys SIP phone with CCM5?

Thanx

Vlad

[Rob Huffman]

Hi Vlad,

My understanding of adding Third Party SIP Phones is that you just need the normal License units on CCM 5. Have a look at the following;

Add and configure the third-party SIP phone by choosing Third-party SIP Device (Advanced) or (Basic) from the Add a New Phone Configuration window.

Note Third-party SIP Device (Basic) supports one line and consumes three license units, and Third-party SIP Device (Advanced) supports up to eight lines and video, and consumes six license units.

From this doc;

http://www.cisco.com/en/US/products/sw/voicesw/ps556/products_administration_guide_chapter09186a00806b13c1.html

Hope this helps!

Rob

Please remember to rate helpful posts.....

[Vladimir Lazovic]

Hi Rob

Thanx for the tip!!

I'll try at once!!

Cheers

Vlad

[Vladimir Lazovic]

hey Rob,

have you managed to register 3rd party SIP phone

Cause it keeps rejecting registration from Linksys ip phone, it is recognizing ip address but it's rejected!!!

I followed instuct. from cisco.com for 3rd party sip phone reg.

Any hints

Thanx

Vlad