I have a DMP 4400G connected to a Samsung 460CX-2. I currently have advanced tasks for the following actions: Turn On, Turn Off, Switch to HDMI Input, Set Volume. We use digital signage with no audio primarily, however, we are tying it in with our emergency alert system and we want to have an alarm sound for ADA issues.
So basically what I would like is to create a system task that could be ran prior to pushing an emergency presentation that would do the following: Send TV On Command (in case TV is off), Switch TV to HDMI Input (in case the tuner is being used for cable TV), Set Volume command (so alarm can be heard).
Is there anyway to do this in a single task? It is a real pain to have to run three separate tasks especially when time is of the essence in an emergency. Any help would be greatly appreciated. Thanks in advance.
This document is intended to receive any new ideas for TAC to create new useful walkthrough videos to help set up deployments, integrations, etc.
Feel free to share any feedback about new walkthrough videos you consider useful, please share your o...
Configuring Cloud Connected PSTN (CCP) – Easy as 1-2-3!
STEP 1: PREPARE
Before you can configure your CCP in Control Hub, you must procure PSTN services from an authorized Webex Calling CCP Partn...
To participate in this event, please use the button to ask your questions
This topic is a chance to discuss more about how to read Cisco Unified Communications trace files. In this session, Cisco D...