cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
1674
Views
0
Helpful
16
Replies

Need a PBX server for Cisco 7900 series phones

jacobpslagle
Level 1
Level 1

Hello,

 

I have a bunch of 7942g and 7962g IP phones that I want to use with my business but I'm having trouble finding a server that supports these phones. Something that would support at least 10 phones. I also need to find a good switch with poe to power these phones. Any suggestions?

 

Jacob

16 Replies 16

Alright I have what I need for unity express should not be to hard to figure out how to get that up and running. Now what about sip trunks is there a certain provider that I need to choose or can I just choose any provider? Do I need a static ip address and is there and is there a good guide from cisco for add sip trunks?

Depends if you are looking for a cheap ITSP or you have go with a premium one. Ensure that your SIP trunk/WAN/DSL is a symmetric link.
Following doc should be good for a CME SIP setup -

https://www.cisco.com/c/en/us/support/docs/voice-unified-communications/unified-communications-manager-express/91535-cme-sip-trunking-config.html