NFAS and MGCp

[mmitchell]

What does one have to do to get NFAS working on a 2620 via MGCP. I have 2 spans 1 d-channel. Everytime I try, it makes each span individual with a d-channel for each.

Thanks in advance

[mmitchell]

I actually found my answer, NFAS only is supported on h.323. Here is a link

http://www.cisco.com/univercd/cc/td/doc/product/software/ios122/122newft/122t/122t11/ft_ccm1.htm

[Nadeem Ahmed]

Hello

Restrictions for Configuring MGCP Gateway Support
• Support for adding the Cisco VGD 1T3 as a Cisco Unified Communications Manager controlled
MGCP gateway requires Cisco Unified Communications Manager version 6.1(2), 7.0(3), or later.
• Only one Cisco VGD 1T3 gateway is supported per Cisco Unified Communications Manager
subscriber node.
• Integrated access is not supported when you control voice traffic using MGCP and Cisco Unified
Communications Manager. Integrated access is when the channels on a T1 interface are divided
between a group used for voice and another group used for WAN access.
• T1 protocols, such as QSIG T1 FGD, and PRI NFAS, are not supported with MGCP.

http://www.cisco.com/c/en/us/support/docs/voice/gateway-protocols/70628-h323-mgcp-compare.html

Br,

Nadeem

PS: Please rate all useful post.