09-17-2019 04:24 AM
Good day folk,
When I log into CUCM and try to view the IP addresses for our VGs, none is displayed. We can putty into the VGs in question so they are up and functional. Any ideas as to why this would happen?
Respectfully,
Prav.
Solved! Go to Solution.
09-17-2019 06:00 AM
Hi,
It depends on which protocol you use to configure voice gateway in CUCM. If you configure voice gateway using SCCP or MGCP protocol then you will not see its IP Address on the first page where you search gateways (Screenshot-1).
You need to click on "See Endpoints" to view registration status and IP Address of the gateway (Screenshot-2).
09-17-2019 06:00 AM
Hi,
It depends on which protocol you use to configure voice gateway in CUCM. If you configure voice gateway using SCCP or MGCP protocol then you will not see its IP Address on the first page where you search gateways (Screenshot-1).
You need to click on "See Endpoints" to view registration status and IP Address of the gateway (Screenshot-2).
09-17-2019 08:27 AM
Thank you!
Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community: