cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
484
Views
10
Helpful
4
Replies
Highlighted
Contributor

Ordering ISR4321 for CME purpose

 
 
Hi,
I have building office need 300 IP phones and I am thinking to use CME from ISR4321-V/K9, and I saw in ccw there is CME-UL user license, my question is do I need to buy 300 UL for 300 phones? to let it work as cme?
 
thanks,
 
1 ACCEPTED SOLUTION

Accepted Solutions
Highlighted

You need End Point license corresponding to the number of device u are going to configure. The part number is mentioned in my previous reply.

++Please rate all useful posts and mark as answer if it solves your issue++

View solution in original post

4 REPLIES 4
Highlighted
Hall of Fame Cisco Employee

If you're with a Cisco partner, you should be reaching out to pre-sales for this kind of assistance.

If you're an end customer, you should be reaching out to a Cisco partner / distributor for buying, and they'll assist with this.

HTH

java

if this helps, please rate
Highlighted

Isr4321 doesn't support 300 phones.Check the below datasheet. 

 

https://www.cisco.com/c/en/us/products/collateral/unified-communications/unified-communications-manager-express/datasheet-c78-744069.html

 

111.PNG222.PNG

 

 

++Please rate all useful posts and mark as answer if it solves your issue++
Highlighted

yes it should be 4431 model you are right! but how about License any information can now about it. 

Highlighted

You need End Point license corresponding to the number of device u are going to configure. The part number is mentioned in my previous reply.

++Please rate all useful posts and mark as answer if it solves your issue++

View solution in original post

Content for Community-Ad