06-15-2005 08:44 PM - edited 03-13-2019 09:29 AM
I have problem registering ata 186 on GK (cisco ios).
GK - cisco c2600-ix-mz.123-1.bin
ata 186 - Version: v3.1.2 atah323 (Build 040927A)
gk config:
gatekeeper
zone prefix mp.com 100. gw-priority 10 main
zone prefix mp.com 1... gw-priority 10 10.1.105.2 Mos_1 10.1.105.3
zone prefix mp.com 3... gw-priority 10 10.1.105.3 Mos_1 10.1.105.2
zone prefix mp.com 4... gw-priority 10 Mos1 10.1.105.2
zone prefix mp.com 77.... gw-priority 10 main
zone prefix mp.com 969001 gw-priority 10 ata1
accounting
gw-type-prefix 1#* default-technology
no shutdown
ata config:
ip, gk, gkid, uid0, uid1 other - default
Nprintf ata rejected on gk:
050525|10:36:45 GK zone<ata1>10.100.1.16: 969001
050525|10:36:45 GK zone:ata1
050525|10:36:45 0x177d50 delayed RRQ: 46 ticks: 300
050525|10:36:45 GK zone<ata1>10.100.1.16: 969002
050525|10:36:45 GK zone:ata1
050525|10:36:45 0x17bbe4 delayed RRQ: 56 ticks: 300
050525|10:36:46 GK<-0: GRQ
050525|10:36:46 RAS target switch: 0x0 => 0xa640110
050525|10:36:46 0xa640110->RAS
050525|10:36:46 GK->0: GRJ: reason 1
050525|10:36:46 GK<-1: GRQ
050525|10:36:46 GK->1: GRJ: reason 1
050525|10:37:01 GK<-0: GRQ
050525|10:37:01 GK->0: GRJ: reason 1
050525|10:37:01 GK<-1: GRQ
050525|10:37:01 GK->1: GRJ: reason 1
06-15-2005 09:07 PM
From the config posted, looks like your GK config is missing:
zone local ata1 mp.com
06-15-2005 10:02 PM
Sorry, its true config
gatekeeper
zone local mp.com mp.com 10.100.1.16
zone prefix mp.com 100. gw-priority 10 main
zone prefix mp.com 1... gw-priority 10 10.1.105.2 Mos_1 10.1.105.3
zone prefix mp.com 3... gw-priority 10 10.1.105.3 Mos_1 10.1.105.2
zone prefix mp.com 4... gw-priority 10 Mos1 10.1.105.2
zone prefix mp.com 77.... gw-priority 10 main
zone prefix mp.com 969001 gw-priority 10 ata1
accounting
gw-type-prefix 1#* default-technology
no shutdown
06-15-2005 10:36 PM
Hi rm76
A good post from Marina that might help you to check config.
http://www.cisco.com/en/US/partner/tech/tk652/tk701/technologies_tech_note09186a00800ab516.shtml
06-16-2005 08:50 AM
So from the debugs you have:
"050525|10:36:45 GK zone:ata1"
ata1, configured on the ata186, is not a zone that is configured on this GK. You need to change the zone on the ata from ata1 to mp.com.
Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community: