05-06-2005 03:29 AM - edited 03-13-2019 09:00 AM
I have two cisco 5350 with the following setting:
Originating cisco :
!
voice service voip
fax protocol t38 ls-redundancy 3 hs-redundancy 0 fallback none
!
dial-peer voice 1 voip
huntstop
destination-pattern 111
session target ipv4:xxx.xxx.xxx.xxx
tech-prefix 011
fax rate 4800
fax protocol t38 ls-redundancy 3 hs-redundancy 0 fallback none
no vad
Terminating cisco :
dial-peer voice 71 voip
huntstop
incoming called-number 111
fax rate 4800
fax protocol t38 ls-redundancy 3 hs-redundancy 0 fallback none
no vad
!
voice service voip
fax protocol t38 ls-redundancy 3 hs-redundancy 0 fallback none
!
So using such settings i can not send faxes.
How can i find the problem ?
05-06-2005 04:59 AM
Hello,
Try change ls-redundancy to 0,
this is just to understand situation.
Do you hear tones ?
05-06-2005 11:22 PM
Hi,
I tried to use ls-redundancy 0 but - no result. When the faxes tring to connect to each other - i can hear the tones, but it looks like short tone and then silence.
Also i use the following commadns to solve the broblem:
-fax nfs 000000 at voip peer, fax interface-type and fax interface-type fax-mail. But no result also.
07-06-2011 10:50 PM
dear jouk
did you problem solved?
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide