Thanks for the reply. First let me say this is a nice application. You did a really great job on it.
I think it might be the messages folder now that I understand more how the application works. I will try to find a place for the messages folder that will allow phones to access.
Thanks again for the help.
cairns-a posted earlier that he had tested it on the 7921 and said it worked.
"I have tested this on 7940, 7960, 7961 and 7921 which all work."
I have not tested the phone myself, but going by what he said it should work.
First off, thanks very much for putting this together!
Secondly, I'm having an issue setting it up. We're currently trying to test this out - I have the page displayed with all the ext's, that works, looks good. I have my own account that is associated only to my phone however I'm not able to push a tone or message to it. Will this work or do we actually need all devices associated first off before anything works?
Any advice would be greatly appreciated.
If it isn't a problem to associate all the devices then I would try doing that first.
I can't remember exactly, but I think I ran into a problem similiar to yours when I had just one device associated to it. It seems that it should work with only one phone associated to it though. I can't honestly remember though. If you are still having trouble with this I can test it out here.
In my case, when sending a message to a specific phone, the remote phone rings once but not message is displayed on the screen.
This piece of code is awesome, I am looking for your help on the same code for the latest version of CUCM 7.0(2) as that dont support devicelistx.asp so what is to be changed in this application so that i can use this on cucm 7.02 environment
With Best Regards
I wanted to know, does this require and IP Phone Service to be created for the IP Phones?
Please if anyone has this application, could you post a link, as the old link seem to be expired.