06-06-2003 12:14 PM - edited 03-13-2019 12:13 AM
How do you get the softphone corporate directory to work. I tried everyhting I could find on cisco's site. Whenver i hit show, the creen just swithces to the phone, no errors, nothing. Its ccm3.3, softphone 1.3
Id appreciate any suggestions.
06-09-2003 06:11 AM
Use this link, this is the one I used to get it working for me:
http://www.cisco.com/en/US/products/sw/voicesw/ps1860/products_tech_note09186a0080111a2b.shtml
Geoff
06-09-2003 07:47 AM
Thanks, it worked, i typoed it
10-29-2003 05:15 AM
Hello,
Just have a look in the softphone admin guide : p3.3
Table 3-2 Configuring Directory Settings
Setting Description
Display Name Enter a name for the LDAP directory.
For example, SoftPhone-CM
Server Name Enter the name for the LDAP server.
For example, ldap.company.com
Port Number Enter the port number used by the directory.
For example, 8404
Account name Enter the directory administrator distinguished name
(DN).
For example, cn=directory manager, o=company.com
Password Enter the directory administrator password.
Search Base Enter the baseor rootof the directory service in which
to search for names.
For example, ou=users, o=company.com
Table 3-2 Configuring Directory Settings (continued)
Setting Description
where o=cisco.com
Enjoy, Christian
10-29-2003 09:54 AM
Christian
I didn't like the idea of having to put in the directory manager name/password so here is how I modified the above to use any valid user ID/password:
Account Name: cn=EnterAnyValidUserID,ou=users,o=cisco.com
Password: (enter password of the user inserted above)
Search Base: ou=users,o=cisco.com
10-29-2003 05:41 PM
You can use Annonymous login on the DC directory and no user/password is required.
06-09-2004 07:32 AM
I am having the same issues. The above solutions did not change the symptoms. I don't think I typo'd it because I checked and rechecked, and even copied and pasted from the document. I have setup the softphone previously a few months ago and don't remember having to do all of this to get the corporate directory to work, it just did. I tried to use the DC directory administrator tool on the CCM server but I don't know the username/pw so I assume the article pertains to me with pw being ciscocisco. Would this have any affect on my problem? Thanks
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide