Some questions about upgrading from 3.0.2 to 3.1.3

[admin_2]

I want to upgrade the UNITY from 3.0.2 to 3.1.3 but fail.<br>Before running setup.exe program in unity 3.1.3 CD, I did following patch installation:<br>1) NIMDA patch<br>2) SQL SP1 + hotfix<br>3) reinstall IE5.5 SP2<br>4) MSXML SP1 <br>(anything missing ?)<br><br>Should I run the ADSchemaSetup.exe on untiy3.13 CD again?<br>Should I remove the Unity Configuration in "Add/Remove Program" before upgrading the UNITY?<br><br>Thanks<br>Rayon<br><br>

[kechambe]

The steps needed to upgrade are here:
http://www.cisco.com/univercd/cc/td/doc/product/voice/c_unity/unity31/inst/inst31/inst_025.htm

Can you be more specific about what failed?

Thanks,

Keith

Keith Chambers
Unity Technical Lead
Unified Voice Team, San Jose
Cisco Systems

[#3]

Hi,

The following is the content in Migration.log. The setup.exe program stopped in "DN to GUID migration".

Should I uninstall the "Unity Configuration" in Add/Remmove program before applying the upgrade?


=======================
Unable to locate ProgID key: AvMigrateDsad.AvMigrateDsad\CurVer
Enter: Old version[3,0,1,29] New version[0,0,0,0] LogFile[D:\DOCUME~1\ADMINI~1\LOCALS~1\Temp\AVU8A.tmp] SysParms[0x0015C854]
Executing Upgrade2_5_29()...
Validating Registry
Validating registry for pom.com
USN for pom.com was invalid.: 00000000
Validating Registry Done
Validating Monitor Object Table
Validating Monitor Object Table Done
Executing DN to GUID migration...
ADsGetObject(LDAP://cn=Locations,cn=Unity,DC=pom,DC=com) in ConvertDnToGuid failed: 80072030
Verify for DN to GUID migration failed: 80072030
Exit: hr[0x80072030]
*** Failed Verification ***

[#4]

Check out the following article regarding the error code from ADsGetObject:

http://support.microsoft.com/default.aspx?scid=kb;EN-US;Q272147