Spark Board direct call with out Cloud registration

[muazam ali]

Hi Guys,

I have Cisco Spark Board, i would to confirm that can Spark Board call to any IP if Spark Board is not registered.

[Vinod.s]

Internal netwotk only..

For public ip...you have to nat with public ip.

[muazam ali]

So lets Assume if I have one Spark Board which is not registered to any
registrar only IP. Then Spark board can call to any video device over simple
ip dialing on local network. Am I correct?

[dijarvrella]

Hi there,

Webex board can be deployed as a standalone SIP or H.323 endpoint however lot of its capabilities are gone.

So depending on the version of the device you can either provision the endpoint from the cloud or on-premises UC infrastructure.

If the version is greater than CE9.8.0, then the Webex Board can be provisioned from both cloud and on-premises infrastructure (CUCM, VCS and TMS). For more details on this refer to the following link https://help.webex.com/en-us/nwdhktbb/Migrate-Webex-Boards-from-Webex-to-On-Premises-Registration

For the Cloud provisioning: If you don't have your Webex Control Hub account created after you have purchased the licensing then you need to contact your account team from your partner or Cisco.

The registration process is really easy. Use the following link to guide you through this process: https://help.webex.com/en-us/n3hi0z8/Activate-a-Cisco-Webex-Room-or-Desk-Device-or-Webex-Board

Thanks,

Dijar