cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
Announcements
144
Views
5
Helpful
2
Replies
Highlighted
Beginner

SRST With WS-6608 Gateway

Is it possible to have a PRI gateway using a 6608 port, at a remote site, register to a 7200 series router during call-manager-fallback? We're doing it all over the place with other routers, but this site has a separate 7200 router and a 6509 with the 6608 blade.

So, can this be configured to work in fallback mode, that is, to be able to call in and out of this 6608 blade during fallback?

Thanks!

2 REPLIES 2
Highlighted
Frequent Contributor

The 6608 speaks MGCP only and works with Call Manager. I'm not aware of a way for it to register to an IOS gateway. Maybe there is a gatekeeper that can speak to it with MGCP but I'm not sure.

Highlighted
Enthusiast

No. The 6608, when configured as a voice gateway, can only act as an MGCP endpoint. It cannot support H.323, SCCP, nor SIP. The 7200 is not capable of acting as an MGCP call agent.

So without CCM or some other call agent server available, the PRIs will not be usable.

Content for Community-Ad