cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
370
Views
0
Helpful
1
Replies

Switch port wih multi-vlan for voice and data?? Help....

azmirccnp
Beginner
Beginner

Hi guys,

I've a situation where my VOIP and DATA on a different segments. Voice is 10.x.x.x riding on VLAN 701. And my data is 192.x.x.x riding on VLAN 100.

The problem occur when our receptionist PC have a software installed for call forwarding for our general line. This software need to be on the same vlan with the IP Phone vlan which is 701. If I put her PC on those vlan, she can't access

to our LAN which is vlan 100. So she can't check her email etc.

Can I know what is the options I have? Can I configured multi-vlan for her PC on the switch? We are using Cisco PoE 3560 switch. Thanks.

1 Reply 1

Brandon Buffin
Advisor
Advisor

You will need to enable inter-VLAN routing either using an external router or layer 3 switch or one of your 3560 switches. The following link shows an example of inter-VLAN routing for 3750/3560/3550 switches.

http://www.cisco.com/en/US/tech/tk389/tk815/technologies_configuration_example09186a008015f17a.shtml

Also, see the following link for other inter-VLAN routing configuration examples.

http://www.cisco.com/en/US/tech/tk389/tk815/tk857/tsd_technology_support_sub-protocol_home.html

Hope this helps. If so, please rate the post.

Brandon

Getting Started

Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community:

Recognize Your Peers