12-20-2007 05:56 AM - edited 03-13-2019 04:49 PM
AS5400XM work as ISDN PRI - ISDN PRI switch using IVR. But both side not hear ringback tone during a call. How can solve this issue?
12-20-2007 05:59 AM
Please see following document:
http://cisco.com/en/US/tech/tk1077/technologies_tech_note09186a0080094c33.shtml
Hope this helps, please rate post if it does!
12-29-2007 10:48 PM
When I made a call without IVR just use two-stage dialing ringback tone is heard. The same call application is run on AS53 and there is not posted problem.
12-30-2007 03:59 AM
Then is responsibility of the IVR script to propagate alerting status from one call leg to anther. Specifically on receiving ev_alert it should execute leg alert.
12-31-2007 01:34 AM
The same IVR script work in AS5300 and AS5350 and there are no problem with ringback tone in these gateways. Note that sometimes ringback tone appear after about one minute of a call in AS5400.
12-31-2007 06:04 AM
Perhaps the other devices are running a different IOS with a slightly different ISDN state machine and TCL/IVR interaction, or simply there is a bug in the IOS running on the 5400XM.
You should look at a comparative isdn trace to know.
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide