05-16-2013 07:28 AM - edited 03-15-2019 05:26 AM
Hi
I had setup of vcsc and vcse. am getting authentication error reason :time difference is too large . FYI I dont have NTP server. is there any method to set time and date manually in vcs to resolve this issue.
thanks
veera.
05-16-2013 07:46 AM
I'd strongly recommend you get an NTP server, or use a publically available one - from http://www.pool.ntp.org/ for example. Otherwwise you can log in as root and use the Linux date command - date MMDDhhmm
Thanks,
Guy
05-16-2013 09:11 AM
Hi GUY.
Thanks for the quick response could you please help me what is the exact command to set time and date via root login into VCS.
else if there any dacument please send me a link
Thanks.
veera.
05-16-2013 11:32 PM
Command is as above: date MMDDhhmm e.g date 05170731 - month,day,hour,minute
Sent from Cisco Technical Support iPhone App
Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community: