03-01-2002 10:57 AM - edited 03-12-2019 02:39 PM
I am installing a new 7960 phone attached to a 3524xl powered switch. The phone powers up and works fine, except I cannot make external (9,5551212) calls. Internal calls work fine, inbound calls from external numbers works fine. I checked the route pattern, gateway, and phone and all are in the same device pools etc. I have 50+ phones working just fine, but all of a sudden, I cannot get any new phones to make external calls when attached to this 3524. I have a phone attached to the switch that works just fine.
03-01-2002 12:08 PM
please check your partitions and calling search space. If the new phones are not in the correct calling search space, they may not be able to reach the partition where Route Pattern associated to the gateway resides
03-01-2002 12:10 PM
Is your outside dial route pattern in a partition? I guess you are using 9.@ or some variation of this. Go to route plan -> route patterns and see if the route pattern is in a partition. If it is make sure the Calling Search Space on the phone can call that partition. You can put the Calling Search Space on the device or the line. Just keep in mind that if you apply different CSS for each then it is the intersection of these partitions.
Let me know if this helps,
-Mckee
03-01-2002 02:01 PM
This is a 'test' installation, and all routes/gateways/phones are in the default partition and calling search space. I have an identically setup phone plugged into the same switch which works fine.
03-01-2002 02:51 PM
What you do you get back when you make the call? Does the call ever get setup or do you get busy or fast busy back? If it does get setup is it one-way or no-way audio?
Have you looked at the detailed ccm trace of the call?
Thank you,
-Mckee
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide