I am trying to upgrade a 2.15 version of software running MGCP to run 2.15 sip with the ata186us.exe. My understanding is the zup file for 2.15 sip is
ata18x-v2-15-020927a-2.zup.
So I type the following command on my pc:
ata186us -h172.16.3.26 -d1 -any2 ata18x-v2-15-020927a.zup
I then see the following
Using Host with IP : 172.16.3.26 as upgrade server
This machine IP: 172.16.3.26
Upgrade Server Port: 8000
Data stream 0 port: 8500
image found: code -- ata186.itsp2.v2.15
Using dialpad of your telephone (attached to your ATA box),
press ATA button to go to main menu, and enter:
100#172*16*3*26*8000# (to upgrade code)
NOTE:
Pressing 123# will announce your code's version number.
You can later verify that you have upgraded your ATA box.
-------------------------------------------
This program runs continuously; Press <ctrl>-c to abort.
Upgrade server ready...
I then issue the dialpad commands and after awhile of waiting the phone says "Upgrade failed" Any reason why this wouldn't work. I can ping the ata188 so I know I can communicate with it.
