05-31-2018 02:30 AM - edited 03-13-2019 10:15 PM
Hello ,
Need some help regarding to design a small Video conference solution to for making video conference between Site A(will be a permanentsite) to Site B(any video conference system)
Existing Site has IP telephony System (BE7K CUCM 10.5, uses also voice jabber, for outside access jabber uses EXPC&E )
what will be required for making a video confernece system in SITE A and any client who has video conference can call in and also site A can call out
05-31-2018 07:05 AM
You can use CMS for that, I'd suggest reaching out to a Cisco Partner (with UC specializations) for assistance with this.
06-01-2018 04:14 AM
Thanks jaime for the response.
what if we use an SX10, NAT it with a public IP. will any video conference (any vendor) from outside will be able to make video call.
will it work or not. (considering only a single conference)
06-01-2018 04:27 AM
07-04-2018 12:48 AM
Dears,
attached existing IP telephony system
and required video conference to be added,
Can anyone help in preparing the BoM for the video conference and what else is required
Can anyone please confirm the attached BoM will be ok, or anything else required
Video Conference Requirements
Optional
07-04-2018 06:47 AM
If you're with a Cisco partner, you should be reaching out to pre-sales for this.
If you're an end customer, you should be reaching out to a Cisco partner for this.
07-04-2018 10:37 PM
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide