12-29-2015 01:45 AM - edited 03-13-2019 09:17 PM
Hi
We have a 4331 router with PVDM4-128 and CUCM 6K 11.x version, it is strange that the newer PVDM4 should not support video conferencing we have 8865 phones , my question is
how do we make video conferencing work either using the router resources or the dsp on phone if possible max party needed currently is 3-4
Thanks
Shabbar
Solved! Go to Solution.
12-29-2015 09:06 AM
None of what you mention is possible, if you want video conferencing, you need a video conference bridge, for example: MM410v, MSE 8710, vTP, etc.
With what you have, you can only do AUDIO conferences.
Even PVDM3s also dropped video CFB capabilities quite recently.
12-29-2015 09:06 AM
None of what you mention is possible, if you want video conferencing, you need a video conference bridge, for example: MM410v, MSE 8710, vTP, etc.
With what you have, you can only do AUDIO conferences.
Even PVDM3s also dropped video CFB capabilities quite recently.
10-08-2017 10:33 AM
PVDM3 used to do conferencing with louder voice on Video.
PVDM4 does not even have the command: "dspfarm profile 1 conference video"
You say that PVDM4 does not support video conferencing at all?
We have the exact same Router 4331 with PVDM4-128.
10-08-2017 04:49 PM
Correct, PVDM's no longer support video conferencing.
Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community: