cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
1623
Views
5
Helpful
3
Replies

Video Conferencing

shabbarbabrawala
Beginner
Beginner

Hi

We have a 4331 router with PVDM4-128 and CUCM 6K 11.x version, it is strange that the newer PVDM4 should not support video conferencing we have 8865 phones , my question is

how do we make video conferencing work either using the router resources or the dsp on phone if possible max party needed currently is 3-4

Thanks

Shabbar

1 Accepted Solution

Accepted Solutions

Jaime Valencia
Hall of Fame Cisco Employee Hall of Fame Cisco Employee
Hall of Fame Cisco Employee

None of what you mention is possible, if you want video conferencing, you need a video conference bridge, for example: MM410v, MSE 8710, vTP, etc.

With what you have, you can only do AUDIO conferences.

Even PVDM3s also dropped video CFB capabilities quite recently.

HTH

java

if this helps, please rate

View solution in original post

3 Replies 3

Jaime Valencia
Hall of Fame Cisco Employee Hall of Fame Cisco Employee
Hall of Fame Cisco Employee

None of what you mention is possible, if you want video conferencing, you need a video conference bridge, for example: MM410v, MSE 8710, vTP, etc.

With what you have, you can only do AUDIO conferences.

Even PVDM3s also dropped video CFB capabilities quite recently.

HTH

java

if this helps, please rate

PVDM3 used to do conferencing with louder voice on Video.

PVDM4 does not even have the command: "dspfarm profile 1 conference video"

You say that PVDM4 does not support video conferencing at all?

 

We have the exact same Router 4331 with PVDM4-128.

Jaime Valencia
Hall of Fame Cisco Employee Hall of Fame Cisco Employee
Hall of Fame Cisco Employee

Correct, PVDM's no longer support video conferencing.

HTH

java

if this helps, please rate
Getting Started

Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community: