X-lite Sip Phone Registration Rejected

[faithmugo]

I have an x-lite sip phone that i added as a third party(basic) sip device on cisco call manager, settings are:

UserID: <Extn No on CUCM>

Domain:<ip address of the CUCM>

Password:<CUCM Digest Credentials>

Authorization Name: <UserID on CUCM>

No Domain Proxy

What could be missing?

[Jonathan Schulenberg]

Take a look at Mr. Bell's writeup on this:

http://www.netcraftsmen.net/component/content/article/70-unified-communications/766-sip-endpoints-in-cisco-cucm-x-lite-as-an-example.html

Please remember to rate helpful responses and identify helpful or correct answers.

[faithmugo]

Hi Jonathan,

I actually followed that guide in my setup..... unfortunately my xlite doesnt register on the cucm. Are there any license requirements?

Thanks

[Sheraz Saeed Lodhi]

Hi Faithmugo,

Did you manage to register it in CUCM. I am facing "account failed to enable " error. 

Using x-Lite 4.8 version while CCM version is 9.0.1.10000-37. I am also following the same link provided by Jonathan.