cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
1455
Views
0
Helpful
2
Replies

2148 FEX to N7K supported?

dtushing123
Level 3
Level 3

Is the N2148K connected to a the N7K M1 line card a supported configuration?

I do not see it listed in the support matrix listed here,

http://www.cisco.com/en/US/prod/collateral/switches/ps9441/ps10110/data_sheet_c78-507093.html

But from the N7K configuration is look as if it's supported,

n7k(config-fex)# type ?

  N2148T  Fabric Extender 48x1G 4x10G Module

  N2248T  Fabric Extender 48x1G 4x10G Module

I'm looking for the official word on this as I have a customer who wants to connect 2148T to their N7K but also support from TAC is important.

Thanks!

2 Replies 2

Derek Zhang
Cisco Employee
Cisco Employee

If you look at the Hareware support RNE of 5.2(1), you'll see only 2248 supportted.

http://www.cisco.com/en/US/docs/switches/datacenter/sw/5_x/nx-os/release/notes/52_nx-os_release_note.html#wp86446

N2K-C2248TP-1GE  Cisco Nexus 2248TP Fabric Extender2  5.1(1)

N2K-C2224TP-1GE  Cisco Nexus 2224TP Fabric Extender2 5.2(1)

N2K-C2232PP-10GE Cisco Nexus 2232PP Fabric Extender2 5.2(1)

Lucien Avramov
Level 10
Level 10

As mentioned in the documentation, it is not supported on N7K. The 2148T only works on N5K.

Review Cisco Networking for a $25 gift card