Could anyone help???Is it possible to policing on the Nexus 5k - reading through the documents it seems it has been replaced with network-qos. But the regular command do not work. Such as; ip access-list policing permit ip any 172.20.0.0 0.0.255....
HelloDoes anybody know if it is possible to connect the 6500 service chassis with ACE in bridge mode by vPC to two aggregation Nexus 7k?I've tried such configuration and as long as there are two operational links between the 6500 and Nexuses traffic ...
I´m working with Nexus 7010 and 7018 and i need to configure a multicast filter (boundary), but i didn´t find any document whose explain how-to-do it on nexus.If we compare multicast command from Catalys 6500, what I need to configure is the "IP Muli...
Hi,We have deployed a couple of Cisco VXC2111 thin clients to the back of 9971 and 9951 phones (all powered with power cubes) and are seeing some strange behaviour. The VXC connects to a vmware view 4.6 server.When we connect a 24"full HD screen, the...
Hi team,We have Nexus 5010 and trying to integrate with N2248T running 4.2(1)N2(1).Fex never come up and interface keep on flapping.Getting message of FEX: 108 Description: FEX0108 state: Offline FEX version: 4.2(1)N1(1) [Switch version: 4.2(1)N2(...
Hello,I tried to establish an preshared SSH key at an Nexus 7K using the procedure for Nx5K (because I didnt found for 7k)http://www.cisco.com/en/US/docs/switches/datacenter/nexus5000/sw/security/503_n1_1/Cisco_n5k_security_config_gd_rel_503_n1_1_cha...
According to Cisco's website, there are specific types of line cards required to support OTV on N7K (N7K-8 port 10GbE with XL options, or N7K-48 port 10/100/1000 Module with XL option).Q1: Do I have to use the physical ports on those line cards to ma...
Hi,I am ruuning ospf between two vlans through firewal on Nexus 7000, and it has stuck in EXSTART state.MTU is same on both VLANS.I also has configured mtu-ignore command .When I am running debug (debug ip packet and the debug ip ospf adj) on, I cant...
Hello:I'm not familiar with the Nexus architecture, so i'd like to know whether there is any special consideration I have to make if I need to replace a FEX 2148 with a FEX 2248. For example, Do physical connections remain the same (basically just pl...
Hi There !!!!!!! Anybody could confirm me if I can create a Po with LACP between a NX2000 and a ESX vConsole Server. The most strange thing is that the po between de Nx5000 and the ESX works, but in the NX2000 didn't. I add the log below:5K-01 %ETHPO...
Hi there,i have the advantage to connect 2 N5k Switches on 2 6500 without VSS over 1GB Ports (Portchannel)I configured LACP on the port-channel interfaces, and all interfaces on the 5ks facing down to the 65 in one Port-Channel and one vPC.Is this th...
Nexus 1000v/1010 experts:Can someone clarify the difference between Nexus 1010 CIMC interface and management 0 interface?I read lots of cisco docs about Nexus 1000v and Nexus 1010, but have not get my hands on physically.1) You can assign IP address ...
Hi,I need to connect two datacenters over two ( layer 3) 10gig links .OTV will be implemented to extend layer 2 VLANs between datacenters at agg layer(in otv VDC).We also have need to run IBGP between two datacenters at core layer (in Core VDC).My qu...
