Other Data Center Subjects

cancel
Showing results for 
Search instead for 
Did you mean: 
cancel

Forum Posts

Problem with NEXUS 5020 hardware version after RMA

After RMA replacement of NEXUS 5020 box"show module" indicates HW version 1.2. On the box we had originally purchased HW version was 1.3Mod Ports  Module-Type                      Model                  Status--- -----  ------------------------------...

vciric by Beginner
  • 1293 Views
  • 4 replies
  • 0 Helpful votes

RHI ISSUE: Removed static routes in the FWSM still appearing in the SUP 720 routing table

Hi.I have a 6509-E SWITCH with a SUPERVISOR 720-10G and a FWSM configured with multiple contexts.The FWSM version is 4.0.8 and the SUP IOS version is 12.2(33)SXI3.One of the FWSM context is configured in routed mode, and is injecting or redistributin...

Nexus 7000 remote labs?

Hello,Is a good place to access a remote lab with the Nexus 7000, 5000, and 2000 series out there on the Internet?And does not include taking a Nexus 7000 class like at Global Knowledge.I configured Nexus based solutions for clients, but want to do s...

ryabutler by Beginner
  • 1355 Views
  • 1 replies
  • 0 Helpful votes

Resolved! Data Center Design: Nexus 7K with VDC-core/VDC-agg model

Dear all,I'm doing with a collapsed VDC-core/VDC-agg model on the same chassis with 2  Redundant Cisco Nexus 7010 and a pair of Cisco 6509 used as a Service  Chassis without VSS. Each VDC Core have redundant link to 2 PE based on  Cisco 7606.After re...