Hello, I need to move an Easy_fabric_11_1 with all it's networks, vrfs, configured interfaces and nexus 9K (NX-OS) switches from existing Stand Alone DCNM environment to the High Availablity DCNM with some already configured MSD fabrics. So I'm loo...
Forum Posts
Resolved! DCNM: No delete icon for service node
I want to delete two service nodes with neither route peering nor service policy attached. Fabric Configuration Guides says: "Click the Delete Service Node icon on the Service Nodes window." But the delete icon is missing in my window! I tried severa...
Please follow part renew SKU on Hyperflex infra !?HX-VSP-6-5-STD-DVMW-VCS-FND-1A=
How can I get the device connector claimcode and device ID through cli?
Resolved! HX Node ESXI downgrade
Hi, Can the ESXI version installed on a HX node be downgraded before it will be added to the cluster?
We are having the issue where Nexus 7000 switch does not currently support having ingress netflow sampling and DHCP relay configured on the same interface.(CSCtf36357)According to the bug details, this issue is fixed in 6.2(2), however we are running...
Hi,Hi, If a scenario like above where sw1 and sw2 is connected using trunk with swA and sw Band add a trunk between A and B , 192.168.8.100 can reach 192.168.101 ? The above design is valid ? If yes , when vpc peer link down does it shuts the port...
Hi,I had to reboot the peer device(primary).After reboot all the interfac showing orange colourHow to fixthe issue Thanks
Hi,Is it possible to build vpc between two different nx os ? The first one is 7.0.xand the second one is 9.0.xThanks
Hi, Is it possible / recommended to have two DCNM physical appliances in native HA mode with the devices connected over two EVPN connected VXLAN Fabrics? Both Fabrics will have latency of <20ms latency between them.I was hoping to configure the first...
Hi,I have the below setup Here vpc running between leaves also ( vpc 200) switches also . I am not sure this is ideal design The problem is s1 is down srv1 will not send the traffic Please help Thanks
I have been trying to put together a design, using some constraints, for a VPC peering setup with BGP.The constraints are (please don't ask why...many reasons here):1. We have to use BGP (no static routing)2. We have to use a Service block switch s...
Hi community,1. When using the topology with Cloud ACI using TGW to connect between infra and user VPC, does it mean the version of Cloud ACI has to be 5.x or later? Or does it mean the ACI On-premises it self has to be at version 5.x or later?My gue...
Resolved! How to delete a VLAN in Hyperflex
Hello, We have an unused vlan named vmnet.VLAN026 in vswitch-hx-vm-network, it doesn't have any VM attached at this moment and we need to know what is the correct procedure in Hyperflex. Thanks in advance, Omar De Souza.
Hi All, Quick question on validating my interconnect between my legacy Nexus 7010 and new Catalyst 9600's. We have a pair of new 9600 (not in a VSS) that we are routing to our Layer 3 access layer however, we have a pair of legacy 7k's and a legacy 6...
