Other Data Center Subjects

Mains power to racked Cisco equipment in data centres

I would just like a sanity check on this. In data centres that I have been in they have used PDUs with unfused IEC C13 outlets to power Cisco devices. Upstream of the PDU there is a 16A or 20A circuit breaker to comply with the Cisco requirement for ...

VDC License LAN_ADVANCED_SERVICES_PKG (N7K-ADV1K9) "Unused" ?

Hi, Currently I have a pair of Nexus 7009 with OS 6.1(2), FAB-2 & SUP2 with the following licenses output: Feature Ins Lic Status Expiry Date Comments Count -----------------------------------...

Upgrade a ws-3850 24X from Bundle to INSTALL

I am upgrading a ws-3850-24X, but it's on Bundle mode. How can I convert it from bundle to install mode. Thanks Jean Casimir

Application EPG and External EPG of different VRFs, having same subnets

Is the following configuration supported? Application EPG and External EPG of different VRFs, having same subnets Below is an example for the above configuration and the intention of using such a design. [EPG-1A] - Application EPG - belonging to ...

DCNM 11 Fabric Management query

We have deployed Cisco DCNM 11(0).1 in Easy Fabric mode. I have following queries - 1) Can we change "Hostname" of the Fabric devices (Leaf-Spine) centrally through DCNM by using any Job/Template ? If Yes, required steps for the same. (I can see...

Resolved! Catalyst 6500-E migration to Nexus 7706 in the Core. VSS TO VPC

Hello Community, I need to migrate a pair of Cisco Catalyst 6500-E to Nexus 7706 to replace the Core. I have several issues in my environment because there are many (SVI) interfaces vlan configured in the 6500 SW that are the default gateways of al...

Bootflash default content on cisco nexus

Hello everyone I've a problem on my device nexus , I don't see the content with the syntax dir in the bootflash .would like to have a help please ?Thanks for all .

Resolved! QSFP Link Problem

Hi AllWe have two N7700 and two N5600 switches.I tried to connect switches as below diagram with 40GBASE-CR4 QSFP Twinax Cables (QSFP-H40G-CU2M).N7K-1 ------ N7K-2| || |N5K-1 ------ N5K-2Now, th...

ACI can Integrate with VMware with VMdomian

HelloTwo questions.1.I am migrating a traditional Ethernet to ACI, in this fisrt step we will connect VMware bere metal host.Accordinlgy to the documentation ACI can Integrate with VMware with VMdomian, but in this phase We dont need this configurati...

DCI with vPC - Problem with HSRP isolation between N5K and N7K

Hi,I have an issue about HSRP isolation (active/active) between two datacenter. Datacenter12 x Nexus 7000vPC domain 1 Portchannel 3 (vPC) to datacenter 2 (Nexus 5000)Datacenter22 x Nexus 5000 with L3 cardvPC domain 2 Portchannel 3 (vPC) to datacenter...

Resolved! N9K-C9372PX / N9K-C9372TX supports break-out mode for UPLINK interfaces ?

Dear All,Anyone knows whether Nexus 9372 (PX / TX) support break-out mode for the 4x 40GE Uplink interfaces?Allowing to uplink the switch using 10GE interface capacity, rather then the full 40GE interface?As stated in the documentation for 9300's mod...

Cisco ACI physical interface shutdown via xml file

Hello allI try to perform a shutdown in the physical interface via xml.But appear the error Invalid access, MO: l1PhysIfChecking the information the physical interfaces (l1PhysIf) needs a different config as the other objects.<?xml version="1.0" enco...

Configuring port security ACI

Hi everybodyI've a question.Is possible configure a type Mac Sticky on the LEAF's ports ?Because, I'm searching but only found is bandwidth configuration on portAnd in the documentation shows "static endpoint" but when configuring the MAC and conect ...

vxlan multisite without route-server

hello,So i have the following scenario: Primary Data Center:2 Spines and 4 leafSecondary Data center:1 spine and 2 leaf. Am trying to do a Vxlan Multi-site.i have a SP link with and l3vpn that give me comunication from site to site,so i wanted to kno...

Remove server from DCNM 7.2.2a federation

Does anyone know the procedure how to remove a Windows binary installed DCNM server from a federation?

Other Data Center Subjects

Forum Posts

Mains power to racked Cisco equipment in data centres

VDC License LAN_ADVANCED_SERVICES_PKG (N7K-ADV1K9) "Unused" ?

Upgrade a ws-3850 24X from Bundle to INSTALL

Application EPG and External EPG of different VRFs, having same subnets

DCNM 11 Fabric Management query

Resolved! Catalyst 6500-E migration to Nexus 7706 in the Core. VSS TO VPC

Bootflash default content on cisco nexus

Resolved! QSFP Link Problem

ACI can Integrate with VMware with VMdomian

DCI with vPC - Problem with HSRP isolation between N5K and N7K

Resolved! N9K-C9372PX / N9K-C9372TX supports break-out mode for UPLINK interfaces ?

Cisco ACI physical interface shutdown via xml file

Configuring port security ACI

vxlan multisite without route-server

Remove server from DCNM 7.2.2a federation

Hearty congratulations to the December Spotlight Award winners!

Renew.cisco.com just got refreshed, and it will make your life easier!

Announcing Resources That Guide You to Success

hyperflex M5 license renewal

DCNM not collecting data traffic for some switches

ASR 9k EVPN scaling

rewrite ingress pop outgoing-tpid dot1.q

Data Center Power

Cisco HyperFlex upgrade without DRS

HCI and ultra low latency switch

DCNM and L3 Peering to ASA Active/Standby Firewalls

Hyperflex Cluster and vCenter Cluster

How to upload file to newer version HyperFlex controller VM?