Other Data Center Subjects

Ask me Anything Webinar: Migration of your Hyperconverged solution

Your Exclusive Ask me Anything webinar on the Migration of your Hyperconverged Solution has landed! Coordinated by our colleagues in the Insider Advocates team and to support customers here in the Cisco Community, Champions, and the Insider Advocat...

as long as VXLAN allows to do L2 bridging and L3 Routing , why IS-IS is behind the seen to perform routing and Adv the VTEP???

Hello Experts would you pls clarify as long as VXLAN allows to do L2 bridging and L3 Routing , why IS-IS is behind the seen to perform routing and Adv the VTEP??? Thanks all Ibrahim

N3K VPLS

Does Nexus 3K switch support VPLS?

Different mac addresses for Anycast Gateway

Hello, Can you please confirm that having vxlan switches with different mac address anycast gateway configured can generate traffic disruption problem? Anycast gateway is locally significant IP and MAC or is there some synchronization of this informa...

CSR1000v ESX crash

We have simple point to point L3 between two CSR1000v instances and we are trying to Extend VLANs from one site to another over OTV on this setup. However, everytime we get the OTV up (site interface and otv interface) and the OTV and ISIS are formin...

Nexus 2224 TP Hardware Specification.

Hi,I'm loking for the following Hardware information related to the Nexus 2224TP;1. CPU2. DRAM3. Flash Memory.Thanks in advance !

Nexus 7000 - "show ip route" command output

Dear All,The "show ip route" commad output is very different from IOS. I did not find any Cisco document that explains all the fields of this output. What is ubest/mbest? I guess it is unicast best and multicast best, but why nexus is showing both un...

Nexus9000 C9272Q chassis | QSA support

Hello all, I have a N9272Q and want to downgrade the 40G ports to 10G using the SFP+ Adapter (QSA) Module. Link is up/up on the other side of the connection but "notconnected" Ethernet1/31 transceiver is present type is QSFP-Cazadero ...

Switch reload

HI, Pls confirm the reason for Sw reload as no one user mgmt. port Kernel uptime is 0 day(s), 0 hour(s), 25 minute(s), 29 second(s) Last reset at 326324 usecs after Fri Dec 15 14:47:08 2017 Reason: Reset triggered due to HA policy of Reset...

Comparison between N7K and N9K line cards

Hi all, I was proposed with N9K as a replacement for our N7K. However, I'm skeptic that N9K line cards are superior. One comparison factor is buffer per port. The 1GE ports of N7K-M148GS-11 has ingress and egress buffer of 7.56M and 6.15M respectiv...

Nexus 5600 QoS

HiI want to apply QoS scheduling using 8 classes per interface in the nexus 5672 As far as I know , Nexus 5600 have 8 queues per portSo in the ingress port, I want to apply COS mark using 8 class-maps and policy-map type qosbut I don't understand wh...

Resolved! N5696-M12Q supported on N6004 ?

Can any one please suggest if we can use N5696-M12Q on N-6004 chassis instead of N6004-M12Q.

is FP the overlay in traditional DC based on N7K while VXLAN is the overlay in DC based ACI

Hi Guys I am confused between Fabric Path and VXLAN As per my Initial Understanding is FP the overlay in traditional DC based on N7K while VXLAN is the overlay in DC based ACI Thanks all Ibrahim

Resolved! install ACI-N9K-48X license

Hello how to install ACI-N9K-48X license in APIC or leaf switch? Thanks.

Nexus5596UP: UDLD Logging

I found logging on N5K-5596UP this below2014 Feb 10 10:04:41 SSW-MAIN-1-F3 last message repeated 1 time2014 Feb 10 10:05:40 SSW-MAIN-1-F3 %UDLD-4-UDLD_PORT_DISABLED: UDLD disabled interface Ethernet1/8, empty echo detected2014 Feb 10 10:05:40 SSW-MA...