Other Data Center Subjects

I bought 2 SUP2Es; they are factory installed with Software  BIOS:      version 2.11.0  kickstart: version 6.2(2)  system:    version 6.2(2)  BIOS compile time:       01/09/2013  kickstart image file is: bootflash:///n7000-s2-kickstart-npe.6.2.2.bin ...

Hi every body, the existing nexus is 7010 with SUP1 and 5x FAB1 I want to upgrade nexus to support uplink 40G SM, so i have to purchase N7K-F312FQ-25=, so i have to change SUP due to SUP1 not supporting that network module. My question is : can i u...

we have a pair of Nexus 5596UP with N5K-C5596UP-SUP and N55-M160L3 daughter card.  the arp table is limited to 8000 entries with this hardware combination.  we have dedicated vlan uses for Load Runner testing.  this vlan can take up to 4000 arp entri...

Hi,CiscoWorks LMS 4.0 timezone is VET. I know that LMS time is syncronized with system time. Hovewer, system time is correct but LMS's time is wrong.-I restarted LMS CW Deamon Manager-I re-installed LMSMy problem still exists.What should I do to sync...

Hi All, I want connect a additional Switch on Distribution layer however as of now distribution layer having two Switches, now i want create multiple peers links on a new nexus switch and want use different domain name for that new additional switch...

attach ment is console log when nexus 7010 sup2e reboot we upgrade nexus 7010 sup2e from 6.2.12 to 7.2.0.D1.1  we leave only one sup2e in slot 5 and use traditional upgrade method not issu but after upload new nx-os,modify boot variable ,and reboot ...

Hello,  We have configured OTV and believe we have it working between 2 DC's over a point to point routed WAN link. Each DC has a pair of Nexus 7004's using vPC for resilience for down linked equipment. A separate VDC has been created as per the Cisc...

I've looked through numerous posts and can't find the answer.............will the nexus 7K eventually support NAT in a version of NX-OS . I see that 7.2 will support NAT in the ITD feature but this is not what I require , I just need ordinary NAT. 

Hi Folks!I´m working on Nexus 7000 and I need to move two interfaces to another vdc,  when I applied the configuration I get a message error, with this information. " Invalid command (too many ranges) at '^' marker. " I checked the commands and seem ...

Has anybody tried setting up VCS (Version Control System) in CIS (Cisco/Composite Information Server [6.2], using a TFS backend?I'm having trouble finding documentation on any VCS topics, but a TFS [scripts] example would be magnificent. Thanks 

Hii Guys ,                         As  i know we can not do mixing of F2 card with M1/M2/F1 card.  F2 needs seperate VDC. But I boot UP unconfigured  nexus 7k that contain two M family cards and rest of card is F2. So after Boot UP , Is Admin VDC aut...

How do we decide about the bandwidth required for a new link. One site has 100 users (Data), no Voice, no Video Another site has 100 users (Data, Voice, Video) My knowledge and understanding for Voice & Video users) 60-65% concurrent users.Voice - 16...

Hi There, Can anyone tell me how to make default port in Cisco Data Center 5K Switch?  When I do show run int e2/10 [the output shows as follows]   switch(config-if)#  medium p2p This interface has been changed into L3, I have tried to bring it back ...

Its a great question.